LINKSYS ETHER16 LAN DRIVER

Just use the NE Or maybe, recove all other Cards you dont need for Dos and try Setup again. Now the next problem is trying to get an IP address, which it won’t do. Another thing you could try is dropping to dos or even test it in a dos system using a suitable packet driver and see if you can get it to connect using the mTCP suite of apps. Return to General Old Hardware. If you are lucky, the network card will have jumpers, otherwise it a case of trial and error to find the IRQ and IO base settings. Did a little further testing.

Uploader: Virn
Date Added: 3 June 2004
File Size: 7.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 82851
Price: Free* [*Free Regsitration Required]

Just won’t freaking get an IP address from the router. Unrelated but it’s probably a good time to mention there was a Winsock update for Windows 95 as well- http: And unfortunately, I don’t have a hub or a switch.

I was able to do a loopback with no problems at all. Linisys tried the stock drivers that came with Windows 95 and the drivers from online and different configurations. Looking for vintage computers and parts. PM me if you have some to give away. Though, I do know that it detects it under Windows just fine.

Testing the loop back or trying another ISA slot is a good idea though.

Now the next problem is trying to get an IP address, which it won’t do. Still couldn’t get an IP address from the router and couldn’t do a loopback that way.

See Also  ACER TRAVELMATE 2301LM DRIVER DOWNLOAD

If so try half duplex or whatever the opposing current setting is. Could be just a duff card, it happens.

Users browsing this forum: Still can’t connect to the network. Return to General Old Hardware. It appears that even though MPU on the SB16 is set at and is disabled, the Ether16 still complains and doesn’t initialize.

Linksys ETHER16 LAN ISA Network Card With Coax Ethernet Connector

I’ve installed it into the system and it seems to be working fine. I Can’t help wondering if it could be a clock dependency of some sort – i.

Board index All times are UTC. There is no material that is knowingly illegal here. Also do you have another card you can use?

Linksys Ether16 LAN Card Model Lne2000t

I’ve pretty much given up on the Ether Did a little further testing. Just use the NE Can you try the Card and Tool in another PC.

In addition, it also does have a tendency to not even initialize properly under Windows in some cases whenever I make hardware changes to the system aln NOT even touch the network card at all.

If you are lucky, the network ethdr16 will have jumpers, otherwise it a case of trial and error to find the IRQ and IO base settings. Setting it manually to what I know is correct gives me a warning linjsys changing resources but everything works suddenly I’m not familiar with that particular card but I’m guessing the driver disk has a setup program where you assign IRQ plus less important stuff like frame type, etc or try another PCI slot and hope plug and play assigns it another one.

See Also  HOW TO INSTALL FUJI XEROX DOCUPRINT C525A DRIVER DOWNLOAD

Linksys Ether16 LAN Card Model Lnet | eBay

That’s not a good sign then that the card is not detected. I ended up replacing it with a PCI card and permanently installing it into the where it had no problem and is actually a good card, also ran the other one in a for years before putting a PCI one in only because I had no spare ISA Ethernet cards for a non-PCI system I was messing with.

If I have the time and motivation to do so, I’ll test it in another machine. Or maybe, recove all other Cards you dont need for Dos and try Setup again. Unfortunately, I couldn’t get very far to installing lniksys utility software as it doesn’t detect the card, even in Windows liknsys DOS with the packet driver successfully installed. Well unfortunately, I can’t seem to find the option to turn down the BUS clock to see if that would make any difference at all.